K44

@ Rolland Is there something in the 21 and newer Mustangs that disabled the flex logic? Thanks

I know this is old but if someone did that to my car it would be an ass whipping at the least.

Mike, have you figured this out?

I was an ASE master tech, still have all my tools. Yes I can install this

If he is not I am.

So Ford crippled the mustang for gen 2 and we cannot use the F150 cal without repinning the injectors and ign coils. On to my next question, can I create a spark adder that uses ethanol content, using the custom OS feature. IE 50% adds 10 degrees 85% adds 20 degrees?

These tables are all spark modifiers.

That would be the way to go but you don't offer it for single use in the US so we need the Ford logic to work.

Is it possible to add tables auf73806 and 73838 from a gen 3 to a gen 2 strategy? These are spark adders for flex fuel KTFK5CG is a gen 3 F150 with the tables populated. All gen 3's have these Mustang's are zeroed out. FSGS05A is a gen 2 Mustang. If these are in the gen 2 ECU can we get them added? If not can I create them using the custom OS feature? I do have an open ticket to get the below tables defined in the gen 2 mustang strategy. These are defined in the gen 2 F150's Tables 79238 to 79268 inclusive. So 79238, 79239, 79240, 79241 ect. Here is a gen 2 F150 cal to look at. KTDP6E6 Thank you

Will do

Can you send me these commands?

I'm a long way away from you but I'd love to test or buy when you get it finished. If it works on the tricore mustang ECU.

Found it, Parameter file. Page 48

I'd like a favorites file that is importable like the log channels in the scanner. Something I can populate with parameters, label it, save it and then be able to import it into any tune I'm working on. I'd like to have a saved file with all parameters for 90mm throttle body another file for GT350 Intake manifold ect. If this is already possible please point me to the section in the manual. Thanks.

What does CDP required mean? Thanks we have had problems changing gears.

I've been playing with it for several hours, it makes sense now. Thanks for the help.

I can't get ctrl + a to work. I am not a coder.

I did. I just was expecting it to work differently. I'll get used to it. Thanks

I was hoping it would work like the differences from stock. Have the changes show up red and have both defined.

I'm trying to merge 2 tunes to see what is different. I'm not having any luck. I'm trying to compare my licensed tune FSGS05A against KTDS4NF' and cannot get it to merge in any meaningful way.

Zero them out.

auF46414 is the on/off switch.

Turning red means something changed from stock.

auF46405 labeled SST DD USFT is the same as ECM 6512 Still cannot find the on/off switch

I've been looking and cannot find these parameters. They are defined in HPT as ECM 6321 and ECM 6512 ([ECM] 6321 - Trans Select Shift Auto Upshift Switch: Switch that determines if automatic upshifting when in SST mode is enabled) ([ECM] 6512 - Trans Upshift Minimum Pedal Position To Upshift In Select Shift: Above this pedal percent, upshifts will be allowed in select shift mode.) Thanks