mejohn50 Posted October 22, 2023 Share Posted October 22, 2023 (edited) Does anyone have any idea if it’s possible to program the cooling fan to run with the key on the but the engine off? I’d like to add that into a multi-tune slot if it’s possible so I can run the cooling fan and my heat exchanger pump (heat exchanger pump always runs with the key on) after a pass at the drag strip. I’ve tried a few things but I’m not sure it’s possible. Thanks Mitch Edited October 22, 2023 by mejohn50 1 Quote Link to comment Share on other sites More sharing options...
BarbysG6E Posted October 25, 2023 Share Posted October 25, 2023 Following! Quote Link to comment Share on other sites More sharing options...
Milanski Posted January 29 Share Posted January 29 That would be a great tip. Ive tried various settings, but it looks like the output only comes on during rpm. Quote Link to comment Share on other sites More sharing options...
BarbysG6E Posted January 29 Share Posted January 29 I wonder what triggers the fan to stay on after the key is out sometimes after a decent flogging Quote Link to comment Share on other sites More sharing options...
mejohn50 Posted January 29 Author Share Posted January 29 I tried a bunch of stuff, don’t remember the specifics off the top of my head right now, but nothing made it work with the key on and engine off. I bet there’s a setting or combination of settings buried down in the Workshop/Development section that could do the trick, but I haven’t found it. Quote Link to comment Share on other sites More sharing options...
midwestracer2003 Posted May 8 Share Posted May 8 Did you ever makeout anything on this i agree this would be a great addition to cool off between rounds Quote Link to comment Share on other sites More sharing options...
mejohn50 Posted May 8 Author Share Posted May 8 No I didn’t. I tried a bunch of stuff and gave up. I bet there’s a setting buried deep somewhere that could make this work, but I haven’t found it. Quote Link to comment Share on other sites More sharing options...
Milanski Posted May 9 Share Posted May 9 I also confirm with mejohn50, i've tried all temperature settings, but as soon as the IGN is turned off thats it - fans stop. Im going to wire in a timer circuit into the relays to at least run the fans in series (slow mode) when turned off. keep you posted. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.