RACEWORX Posted September 19, 2020 Share Posted September 19, 2020 hi guys just playing around with the overlap , currently set to 40 , what is the ideal overlap setting for the barra?? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted September 21, 2020 Share Posted September 21, 2020 If you post in this thread you will likely get some more comments. If you have a read of my comments "Beware that if you command too much overlap you will foul your plugs and the car will misfire until they clean up. 35 degrees is quite a lot and I would only recommend this as gimmick not in a daily driven car." the conclusion would be that 40 is way too much and will likely start misfiring. This assumes that you are actually hitting the cell exactly, if you datalog you may find you aren't actually running 40 degrees but rather 20 due to being at a higher load/tps than the cell you have commanded it in. There are also sample files here which might be of interest. Quote Link to comment Share on other sites More sharing options...
RACEWORX Posted September 22, 2020 Author Share Posted September 22, 2020 hi thsnkyou for your reply roland , okay so how can I set exhaust cam to constantly run 35 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.