Srogers1993 Posted November 20, 2020 Share Posted November 20, 2020 Pretty much the image has whats needed but if i was to copy the table exactly from the FG Pcm to the BF PCM including ROW and Column Numbers would it work or doesn't the row and column numbers get flashed to the pcm, cheeers Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted November 20, 2020 Share Posted November 20, 2020 Have you tried opening the axis by double clicking and copying? You could also compare the two files and copy that way. Quote Link to comment Share on other sites More sharing options...
Srogers1993 Posted November 20, 2020 Author Share Posted November 20, 2020 Yes I was asking if I had changed them does it just change it in pcmtech or would it modify it in the pcm itself aswell Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted November 20, 2020 Share Posted November 20, 2020 Pretty easy to test your theory. Write it to the car then read it back out and see what it says? Quote Link to comment Share on other sites More sharing options...
Srogers1993 Posted November 21, 2020 Author Share Posted November 21, 2020 2 hours ago, Roland@pcmtec said: Pretty easy to test your theory. Write it to the car then read it back out and see what it says? Well yeah guess that works haha will let you know soon Quote Link to comment Share on other sites More sharing options...
Srogers1993 Posted November 21, 2020 Author Share Posted November 21, 2020 Can confirm it works, transferred over everything from a FG PCM to BF PCM and it runs flawless, just note I have the professional version not the workshop so I wasn’t able to do everything Possible unfortunately, btw is a Fg motor, BA Loom, repined to BF PCM with ba throttle and throttle body Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.