Mick Posted December 7, 2021 Share Posted December 7, 2021 Should I be able to read a FGX Ecoboost? I have tried public release and Beta, have tried recovery, full read and virtual read and can not communicate with the car. Vehicle info does not bring up any information either. Quote Link to comment Share on other sites More sharing options...
Zhuojian@pcmtec Posted December 7, 2021 Share Posted December 7, 2021 Hi Mick, what cable you are using for the read? And can this car connect to FORScan? Quote Link to comment Share on other sites More sharing options...
Mick Posted December 7, 2021 Author Share Posted December 7, 2021 I'm using a Tactrix Openport for the editor and it does connect with Forscan but my OBD2 Australia dongle does not Quote Link to comment Share on other sites More sharing options...
Zhuojian@pcmtec Posted December 7, 2021 Share Posted December 7, 2021 We only support J2534 cable so Tactrix Openport should be fine. So it still does't read using Tactrix Openport with the Editor? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted December 7, 2021 Share Posted December 7, 2021 Ecoboost Falcon is not supported at this stage. 1 Quote Link to comment Share on other sites More sharing options...
Mick Posted December 7, 2021 Author Share Posted December 7, 2021 that will explain it, Thanks guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.