BarbysG6E Posted October 21, 2023 Share Posted October 21, 2023 Is there a way to use the Openport 2.0 adaptor the access MS CAN with forscan I need to disable police mode in a G6E but I can't pick-up the instrument cluster? I know the eBay spec elm adaptors have a manual switch but I only have the op 2.0 Quote Link to comment Share on other sites More sharing options...
Bill Posted October 21, 2023 Share Posted October 21, 2023 2 hours ago, BarbysG6E said: Is there a way to use the Openport 2.0 adaptor the access MS CAN with forscan I need to disable police mode in a G6E but I can't pick-up the instrument cluster? I know the eBay spec elm adaptors have a manual switch but I only have the op 2.0 No, the Tatrix doesn't support MS CAN & you should avoid the cheap ELMs with a manual switch, they're usually cheap crap. The VGATE vLinker FS cable is a cheap auto switching cable with regular firmware updates to keep up with FORScan development. 1 Quote Link to comment Share on other sites More sharing options...
BarbysG6E Posted October 21, 2023 Author Share Posted October 21, 2023 Thank you for the response I thought that might be the case, my elm went straight in the bin it was dead on arrival a few years back Quote Link to comment Share on other sites More sharing options...
BarraTuna Posted December 18, 2023 Share Posted December 18, 2023 i got the obdlink cable for forscan, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.