richardpalinkas Posted April 16, 2019 Share Posted April 16, 2019 Has anyone used an obd port double adaptor without any issues? I have my sct x4 plugged into one port, am I able to flash with the the other port without causing any issues to the sct x4? So I can log and flash without the need to constantly unplug one obd plug and swapping them all the time? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted April 16, 2019 Share Posted April 16, 2019 Yes I do this all the time and so do many workshops. Just beware that if you try and flash whilst you are still data logging or vice versa you can cause weird behaviour. It is pretty easy to forget. Quote Link to comment Share on other sites More sharing options...
richardpalinkas Posted April 16, 2019 Author Share Posted April 16, 2019 So just make sure you stop data logging when flashing? Thanks mate Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted April 16, 2019 Share Posted April 16, 2019 13 hours ago, richardpalinkas said: So just make sure you stop data logging when flashing? Thanks mate Yes. Even then it isn't the end of the world, you might just have to unplug both adaptors if one of them locks up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.