DanStraffa Posted April 17, 2020 Share Posted April 17, 2020 Hey is there a parameter that you can change to make the time to prime the fuel system when you cycle the key on? I’ve changed :- auF13397 from 1 to 0 auF10279 from 3 to 10 seconds auF0356 from 8 to 12 seconds auF1930 from 5 to 3 seconds Still have seen no change from the 1.5 seconds the pumps prime for. Anyone have any other ideas? Quote Link to comment Share on other sites More sharing options...
LeocairnsTT Posted April 19, 2020 Share Posted April 19, 2020 Hi Yes i have the same issue as i run a twin pump system in the tank and it would be nice to prime it longer i have a feeling the setting cannot be changed as i have tried correcting this to 60 sec still no change i was thinking of putting in a trigger timer to bypass it Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted April 20, 2020 Share Posted April 20, 2020 I've confirmed it uses a hard coded constant of 2 seconds for the timer. You would need to user a timer relay with a TOFF delay to extend the prime timer. The other values are used for plant priming when the odo is < 100km or you demand a fuel pump test from IDS. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.