will15 Posted May 20, 2020 Share Posted May 20, 2020 Hi im tuning a manual fg turbo and at light cruise it will max out to the timing clip of 55deg, it doesn't matter what numbers are in the main mbt and knock timing tables, Is there a adder table some where? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted May 21, 2020 Share Posted May 21, 2020 Change the max spark clip. Realistically 55 deg is likely MBT at cruise or close to it, you might go backwards increasing timing past this. Quote Link to comment Share on other sites More sharing options...
will15 Posted May 21, 2020 Author Share Posted May 21, 2020 I have done that, I just found it strange it going up 55 when the max in the tables are 50 Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted May 21, 2020 Share Posted May 21, 2020 There are adders for MBT and borderline based on IAT, ECT, lambda etc. Datalog all of the above, check the adder tables and work out what it should be. Quote Link to comment Share on other sites More sharing options...
will15 Posted May 21, 2020 Author Share Posted May 21, 2020 I have tried a can’t select any channels in the scanner, they have all disappeared Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted May 21, 2020 Share Posted May 21, 2020 You need to connect to the vehicle first by pressing the "vehicle" button. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.