joephxr6 Posted July 14, 2020 Share Posted July 14, 2020 i have done a manual conversion to my FG now my cruise control dont work so I can use multi tune function do you know a way around this and it is the automatic wireing in it Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted July 15, 2020 Share Posted July 15, 2020 Clutch and reverse switches need to be wired in, also need the diff and gear ratios to be set up to reflect what is in the car. You can datalog all of these values. If you don't see the clutch input and reverse input toggling, then you know where your problem is. Quote Link to comment Share on other sites More sharing options...
joephxr6 Posted July 15, 2020 Author Share Posted July 15, 2020 i have the reverse switches in and working so how do i do the clutch one Quote Link to comment Share on other sites More sharing options...
joephxr6 Posted July 15, 2020 Author Share Posted July 15, 2020 wire up the clutch Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted July 15, 2020 Share Posted July 15, 2020 Take it to an auto electrician or buy a workshop manual with electrical drawings. Quote Link to comment Share on other sites More sharing options...
Darryl@pcmtec Posted July 21, 2020 Share Posted July 21, 2020 clutch input is not in the FG auto loom, you need a manual loom to get that working or you can leave the auto calibration in and change the tune. see: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.