Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by scotty

  1. Is that table available with the ba? I didn't see it when looking before but then i may have missed it
  2. I see that we can get a ghost cam with the 5.0 now but is there a way to achieve this with a Ba 5.4, been going to play with mine to give it a go but just wondering where to start looking and now I have a potential customer wanting it as well.
  3. Yeah those are the stock settings looking at where to change them too
  4. Thanks for that Roland. I see that you changed cylair max factor to 1.0 to achieve 1.7 airload capping for 10psi. I am looking at about 18 to 20 psi what to you think I should change cylair max factor to for this. Or is their a calculator to work this out. I believe 1.1 would be in the ballpark but I could be wrong. Thanks for all your help again.
  5. When I bought my xspurts it didn't come with any info but I just emailed the company I bought it from and they emailed me the data sheet.
  6. Ok so it played again this arvo while i was out, so i checked coolant temp and it was sitting 83 degrees.
  7. ok thanks roland will give it a try
  8. Hi guys, hoping you can help me out here. Its one of those problems that's hard to nail down, as I only get a short time to try stuff and it doesn't always happen. When I try to restart my ba xr8 after driving it for a while all it does is wind over and won't fire. The only way I can then get it to start is to force start it on lpg. This only happens if I try to restart it within about 10 mins of turning it off, but it will restart fine if its only a short trip. At first I was suspecting my aftermarket fpr may of being getting heat soak and affecting fuel pressure but I ch
  9. Hi Roland just wondering if you could explain what the number in cylair max factor is doing. Thanks scottu
  10. Will give that a look too. Gonna double check injectors, but I suspect I have a weak coil as well so I will change those first and then double check every thing else. Scotty
  11. I have stage 1 crow cams and my idle vac is 15 to 17 inhg
  12. The problems are slowing too return to idle and hunting at idle. I will get a datalog in the next couple of days and post it for you. Manifold size maybe an issue as well as it has a 302 manifold on it and I am unsure of it's size. The bypass shouldn't be causing an issue as it's either open or closed. That's the information I have been given by the supplier anyway. Thanks Scotty
  13. Idle, return to idle are the things I am mostly unhappy with. I did have injector issues but they are dialed in pretty well now. I have got an adjustable fuel pressure reg and gauge and it's sitting on 4 bar. I am thinking it's probably more air flow issues that are giving me dramas esp with the size of the tb and the boost from the side mount.
  14. Just wanting to pick the brains of the tuners on here as to what they would be looking at tune wise for my car. It's a built boss 260 with a side mount charger, 6 spd manual, bigger throttlebody, 1000cc injectors, bigger fuel system etc. I have a tune in it that I have written and some of that tune came from a shop who tuned it previously and then I modified it in places as I wasn't happy with it and I also changed from auto to manual and changed charger brands. I am still not completely happy with and feel like I am missing something, so I was just wondering what people's thou
  15. scotty


    Hi Roland can I have the beta sent to me please. Thanks Scott
  16. scotty

    tactrix problems

    Ok I will check that. It's always had a pcm error.
  17. scotty

    tactrix problems

    Thanks Roland I will have a read of that post. No it's not locked, the pcm is from my sedan and was tuned by a large shop in Melb when I had the vortech supercharger in it. When i transferred the engine into my ute I used the same tune and have been trying to fine tune it with sct since.
  18. scotty

    tactrix problems

    it says it has a DTC permanent checksum error, which may make the vehicle undrivable. I have always had an error code come when i have scanned it and I always put it down to the aftermarket tune in the car, but maybe I am wrong.
  19. scotty

    tactrix problems

    Woohoo success! It wasnt the cable it was the usb port in my laptop, all good now though. On a side note i have just read the file in my car and it is telling me i have a checksum error. Any thoughts? Thanks for all the help and advice. Scotty
  20. scotty

    tactrix problems

    The territory didn't come onto work and we usually get a few Ford's in but not one last week lol. Work has been flat out so I'll have another look in the next few days.
  21. scotty

    tactrix problems

    Thanks. I just wanted to make sure it was a failure before I emailed you, I understand these things can happen if it is a faulty cable.
  22. scotty

    tactrix problems

    Thanks finnigan I will give it a go tommorow and if its a no go then I will hit them up and see what they say.
  23. scotty

    tactrix problems

    Yeah I have a territory I can try tomorrow, so I will give that a go and see what happens.
  • Create New...