FFF666 Posted September 20, 2020 Posted September 20, 2020 Has anyone used FG coils (including plug adaptors/loom) in a BA/F turbo? Was it just dwell settings that need to change to FG times? Already tried it and it’s throwing coil codes. Quote
Roland@pcmtec Posted September 21, 2020 Posted September 21, 2020 Apparently they should just work without changes, but to do it correctly you should change the dwell. It sounds like an issue with the loom is more likely? Quote
boostedfalcon Posted July 4, 2022 Posted July 4, 2022 Any more info on this? Chasing info on what should be done when fitting fg coils to a BA. Does anyone have the dwell setting to be used for this please? Quote
Puffwagon Posted July 4, 2022 Posted July 4, 2022 The coils are physically different and as such you need to run an FG rocker cover to bolt the coils into. The FG coil plugs are different too so you will need to swap them over. This is all you have to do. I've run FG coils with stock BF dwell times and they work fine. So far I've taken them out to 40psi and just over 700awkw like this, iirc the plugs were gapped to 0.5mm. If you run into spark blowout issues then raise the dwell time slightly or use the FG parameters. You will find the dwell times for the FG coils in an FG tune file. It looks like old mate already posted the dwell times in the first post but as usual, verify this for yourself. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.