jakka351

6FPAAA-FG.xlsx

according to this the bowser should display "contains 70-85% ethanol". You have been mislead by the labelling, so maybe you have something. I dont think they will be very helpful though. https://www.legislation.gov.au/Details/F2019L01281

Just like all the 98 pumps say 98 Octane *RON

Hi, E85 sold in Australia does not have to be 85% ethanol, it can actually be in the range of 70%-85%. If you are filling up at the servo it is going to be very hit and and miss - both with regards to ethanol percent and fuel quality especially at the one that sells E85. I would invest in a means to detect water in your fuel as well - with petrol, water will not mix and will sit at the bottom of a tank, but water will mix with ethanol. With E85 the water can form an azeotrope and become "mixed" in a sense. Maybe consider buying by the 205 L drum from a racing fuels place? They should be able to guarantee quality and content. Sauce: Race Blend E85 - United Petroleum SDS - (6130B96D-3CFC-4458-A838-CDB4752FFEF5)Safey Data Sheet LQ2ZX00 AU EN (unitedpetroleum.com.au) "The autogas fuel standard describes liquefied petroleum gas (LPG) suitable for motor vehicles. Petrol sold in Australia may contain up to 10 per cent ethanol (‘E10’). The Ethanol E85 fuel standard describes a fuel blend consisting of 70–85 per cent ethanol and 15–30 per cent petrol" Regulating Australian fuel quality | Department of Industry, Science, Energy and Resources

My (non) understanding of it is that they designed basically as flow charts, which in turn each part of the flow chart is a reference to another flow chart, and so on and so on and so on until you reach flowchinifinity. It's quite impressive what PCMTec has done, it's one thing to figure out how to download and upload the data, but to then go on and define it and make use of it was likely not an easy process.

Getac make ruggedized Windows 10 laptops and tablets, The F110 is the model name. Google it

This is good, thanks.

Thanks, I will see what the go is after the new year for retail ones

Can I buy some PCMtec stickers? Do you guys have any issue with stickers on cars (from an enthusiast perspective not a business one)?

This could be the issue, you can disable/modify ETC as a method to limit torque there, if auf0261 is all set to 1 it is allowing the PCM to choose from every possible torque reduction option so it is choosing ETC in this case to limit engine speed. (I think, somebody correct me if inaccurate). This post has better info on those params.

Hi, thanks

supported by PCMTEC, specifically the Ford and JLR models, I have an MFC2 Toyota variant - assuming no good as FEPS pin not set up? Detected but J2534 error. Waiting on Tactrix to arrive

and high speed: FC 4C0 80 454

Hey would anyone have anything for these CAN IDs on mark 1 midspeed can: 2C4 2CA 2CC 2CD 2CE 2CF 2D2 2D3 2D4 2FE 2FF 300 301 302 304 305

The welding bit is what he should be worried about.

https://github.com/jakka351/FG-Falcon#canbus-decoded theres fsir amount of can info in those spread sheets might help you

Thank you, appreicate it. I'll link my .dbc file too, but it is still a WIP. https://github.com/jakka351/fgdbc/blob/main/falcon.dbc

ever post that emulator you were working on?

Not fussed about making more power, car is probably as powerful as it can get without forced induction. Has full extractors and pipes all the way back, had a big intake but returned to stock as moved to sunny melbourne, plus throttle controller and short shifter. I am more interested in learning about how PCM's work and seeing what comes from poking around as well tinkering with random things like cutting the AC compressor clutch automatically @ full throttle and air cooling the engine via cylinder cutout in an overheat condition. Random but yep.

I can see it on the config tab:

Sorry hit post button early Am considering purchasing a license. Am I in the ballpark with the basic needs required for getting started. Windows 10 Laptop 8g ram ssd hard drive Tactrix Interface Wideband o2 sensors I have a Boss 5.4 (302) with a pcm that was flashed by an SCT tuner by BlackMac Performance in WA, who have since shutdown, I think the PyCM is locked, is this an issue? I cannot see any config or as built data for it on Forscan, only have the option to reset adaptations. Also concerned about nuking my engine, common sense aside are there inbuilt warnings in the software that suggest a value is too high or low?

Am considering purchasing a license. Am I in the

Not these drivers? https://ftdichip.com/drivers/vcp-drivers/ Still, would need to buy a copy of windows to run a virtual machine. Negating the reason for asking in the first place - buying a copy of windows.

Has anyone succesfully done this yet?

I have been using a socketcan to map out the the CAN in my FG mk1 - sheet is here https://github.com/jakka351/FG-Falcon