john.z Posted June 20, 2021 Share Posted June 20, 2021 fitting a bf 2bar map sensor to my fg xr8, what do i need to change to go about this? i cant find any info on the voltages so i dont know what to change the slope or offset to. Its the clone 2 bar map sensor off T.I Performance Quote Link to comment Share on other sites More sharing options...
Puffwagon Posted June 20, 2021 Share Posted June 20, 2021 https://www.tiperformance.com.au/knowledge-base/fitting-a-xr6t-map-sensor-to-an-na-aubabf-quick-reference-guide/ If the clone is the same as a genuine 2.7bar map sensor then you can use the data from a xr6 turbo tune. 1 Quote Link to comment Share on other sites More sharing options...
Darryl@pcmtec Posted June 20, 2021 Share Posted June 20, 2021 Hi John, If you use the factory turbo TMAP sensor then you only need to enable Turbo Logic via auF0281 and the sensor will automatically be scaled correctly. The factory turbo sensor is a 255KPA sensor so it will support about 21lbs of boost 1 Quote Link to comment Share on other sites More sharing options...
galapogos01 Posted June 29, 2021 Share Posted June 29, 2021 (edited) Confirming this clone sensor does use the factory Turbo transfer/scaling. Cheers, Jason Edited June 29, 2021 by galapogos01 Quote Link to comment Share on other sites More sharing options...
john.z Posted June 30, 2021 Author Share Posted June 30, 2021 On 6/29/2021 at 3:41 PM, galapogos01 said: Confirming this clone sensor does use the factory Turbo transfer/scaling. Cheers, Jason just checking, was that a question or a statement? Quote Link to comment Share on other sites More sharing options...
galapogos01 Posted June 30, 2021 Share Posted June 30, 2021 It's a statement mate. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.