Karl Posted April 2, 2019 Share Posted April 2, 2019 Does anyone on here have the factory settings for the throttle of a N/A FG XR6 6 speed auto? I had one of those revhigh stealth coantrollers on my car once apon a time and wandering if that has changed a setting in my tune and is causing the car to stall and jerk when slowing down. Quote Link to comment Share on other sites More sharing options...
richardpalinkas Posted April 2, 2019 Share Posted April 2, 2019 If it's plug and play, it shouldn't have any effect of the tune file itself. Should revert back to stock after you remove it. Maybe try clearing KAM and see if this helps Quote Link to comment Share on other sites More sharing options...
Karl Posted April 2, 2019 Author Share Posted April 2, 2019 Cheers Richard, must be something to do with the tune and cams then. Quote Link to comment Share on other sites More sharing options...
Lucky Posted July 23, 2019 Share Posted July 23, 2019 hey guys just wondering if you can adjust some parameters to replicate the REV High throttle controller with in PCMTec software as I cant buy one for my car apparently they dont make them for 2006 ford territory turbo's, and if so what tables would i need to play with ? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted July 24, 2019 Share Posted July 24, 2019 Yes you technically could, but you would risk causing issues with the torque reduction/idle control and cruise control system. You will most likely cause limp mode and possibly dangerous acceleration under cruise control. If you do play with the throttle maps ensure you test it on a dyno and not on the road. Quote Link to comment Share on other sites More sharing options...
apoc Posted November 19, 2019 Share Posted November 19, 2019 Bit of a thread mine, but I've been playing with throttle settings on my BA gas motor with FG cams & inlet, and its a bit of a prick to get working. (BF PCM - HACCKBC). Can't seem to get throttle settings to stick, even if I copy the entire Drive by Wire / Pedal & Throttle limits tabs from the FG HAEDDEZ tune. Seems to get to WOT too quickly, then throws an ETC code at me. Will keep at it and let people know if I work it out. I'm assuming the BF PCM doesn't have a function or something, or the BF pedal has different voltage ranges? (FG T/B) It's in a GQ patrol, so bit heavier than a falcon. Needs a bit more responsiveness! Any help would be great, but understand the disclaimers :) Quote Link to comment Share on other sites More sharing options...
dylbott94 Posted May 5, 2021 Share Posted May 5, 2021 On 11/19/2019 at 6:22 PM, apoc said: Bit of a thread mine, but I've been playing with throttle settings on my BA gas motor with FG cams & inlet, and its a bit of a prick to get working. (BF PCM - HACCKBC). Can't seem to get throttle settings to stick, even if I copy the entire Drive by Wire / Pedal & Throttle limits tabs from the FG HAEDDEZ tune. Seems to get to WOT too quickly, then throws an ETC code at me. Will keep at it and let people know if I work it out. I'm assuming the BF PCM doesn't have a function or something, or the BF pedal has different voltage ranges? (FG T/B) It's in a GQ patrol, so bit heavier than a falcon. Needs a bit more responsiveness! Any help would be great, but understand the disclaimers hey mate im playing around with this my self and wondered if you worked anything useful out ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.