Jump to content

BF ECM on Ba


Recommended Posts

Hi Team.

HACCKD5 / 2008 / Spanish Oak 1024K - is this Bf ECM?

I was trying to get this to replace my BA ecu, and after much dicking around i decided the wiring may be different. The ECM does give throttle pedal error and does nothing when you touch the throttle. It does start and idle, however it kinda sounded like it was running on three cylinders.

it does have the three plug option, where as my ba was only two plugs.

any thoughts? 

Link to comment
Share on other sites

Just now, Puffwagon said:

There is a calibration list in the PCMTec program. You'll be able to see what it is there.

only for workshop bois tho? 


also i need to google more



when used in a stand alone setup the main differences are the bf alternator com wires replace the 2 ba pedal wires at b28 & b29 which then share 5v on pin b45 and share signal return on b33 instead, the o2 wires are all part of the A plug/engine harness in bf, the bf alternator warning wire replaces the o2 signal wire from ba at b8, bf has an extra knock sensor and all the btr control is through the c plug in bf.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...