mickyb90 Posted September 28, 2021 Share Posted September 28, 2021 Any idea when we will have access to new version? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted September 30, 2021 Share Posted September 30, 2021 We are aiming for public access to the beta when our next sprint finishes (we are doing fortnightly alpha releases). I would like to say the end of October pending any unknown major issues that we don't yet know about. This will only be for the workshop edition initially until we port all our new naming and parameters over to professional/enthusiast levels which should come soon after. If you have the workshop edition and would like to trial the alpha please get in contact with us. The requirement is that you actively participate in the beta program by sending in high quality bug reports with regular use of the software (at least once a week). Quote Link to comment Share on other sites More sharing options...
westo Posted October 4, 2021 Share Posted October 4, 2021 Would there be any discounts when the new version is available from going to professional to workshop Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 5, 2021 Share Posted October 5, 2021 2 hours ago, westo said: Would there be any discounts when the new version is available from going to professional to workshop We won't be doing any further discounts for the full workshop product. We would like to release a single use workshop edition next year (time pending) where you get workshop access to a single vehicle for a discounted price, however we have several other projects on which are consuming all of our time at the moment so we don't have a timeline for this. 1 1 Quote Link to comment Share on other sites More sharing options...
yoda598 Posted October 5, 2021 Share Posted October 5, 2021 Care to elaborate on the other projects or is it all still hush hush.. Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 5, 2021 Share Posted October 5, 2021 2 hours ago, yoda598 said: Care to elaborate on the other projects or is it all still hush hush.. Support for all 2.3T, 3.7 NA, 3.5T, 5.2NA, 5.0NA and 5.0 Supercharged 2015-2021+ F150 and Mustangs with other Fords coming after release. Approximately 2500 strategies and 350 operating systems across 5 different CPUs we have mapped so far (Falcon was only 165 operating systems over 2 different CPUs). We then plan to offer the Falcon style multi tune on with full mapping support (eg 30k parameters). To do this we have had to spend the last 2 years with 3 new staff writing various tools to automate mapping and naming about 80,000 different parameters. It is incredibly time consuming doing this whilst supporting the existing business but we are almost complete with quite a few shops beta testing it now. The other major project has been the new datalogger and 2.1 Falcon template renaming (new naming, units and descriptions for about 5000 parameters in the datalogger and editor). Quote Link to comment Share on other sites More sharing options...
yoda598 Posted October 5, 2021 Share Posted October 5, 2021 that's brilliant! I've been using the beta for a few weeks now. definitely headed in the right direction. keep it up! 1 Quote Link to comment Share on other sites More sharing options...
JETURBO Posted October 8, 2021 Share Posted October 8, 2021 And Roland has to deal with me being a pain in his arse constantly but the team are doing really well there hahah. Very happy with the new updates guys keep up the amazing work and that data logger is definitely heading in the right direction ! would there be any chance to have all the values populate on the left hand side of the logger 2D map vs x2 on left and x2 on right ? 1 Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 8, 2021 Share Posted October 8, 2021 9 minutes ago, JETURBO said: would there be any chance to have all the values populate on the left hand side of the logger 2D map vs x2 on left and x2 on right ? I think we actually started out like this and decided the split was cleaner. But its probably reasonably easy to enable something to let you select Kirby made this in paint, is that what you mean? Or the axis as well? or just the axis? Quote Link to comment Share on other sites More sharing options...
Kirby@PCMTec Posted October 8, 2021 Share Posted October 8, 2021 On 10/5/2021 at 3:20 PM, Roland@pcmtec said: To do this we have had to spend the last 2 years with 3 new staff writing various tools to automate mapping and naming about 80,000 different parameters. It is incredibly time consuming doing this whilst supporting the existing business but we are almost complete with quite a few shops beta testing it now. The other major project has been the new datalogger and 2.1 Falcon template renaming (new naming, units and descriptions for about 5000 parameters in the datalogger and editor). So very tired....😂 Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 8, 2021 Share Posted October 8, 2021 For anyone interested this is the charting library we use. So anything shown on this page could technically be done at some point. They have an interactive demo you can download as well. https://www.arction.com/gallery/ Quote Link to comment Share on other sites More sharing options...
yoda598 Posted October 8, 2021 Share Posted October 8, 2021 Roland, I like it as you've posted it above. And Kirby, I bet! Quote Link to comment Share on other sites More sharing options...
Bill Posted October 8, 2021 Share Posted October 8, 2021 3 minutes ago, yoda598 said: Roland, I like it as you've posted it above. And Kirby, I bet! I'm liking the look of the above too. I wonder how it would look docked to the right 😂 @Kirby@pcmtec Quote Link to comment Share on other sites More sharing options...
yoda598 Posted October 8, 2021 Share Posted October 8, 2021 @Kirby@pcmtecis probably falling asleep at the moment haha... but in all seriousness, we appreciate the work you guys do 1 Quote Link to comment Share on other sites More sharing options...
Kirby@PCMTec Posted October 8, 2021 Share Posted October 8, 2021 18 minutes ago, yoda598 said: @Kirby@pcmtecis probably falling asleep at the moment haha... but in all seriousness, we appreciate the work you guys do Actually I am consolidating all the units and math tables. lbs*ft/(RPM^2) how's that for a unit. 1 Quote Link to comment Share on other sites More sharing options...
Kirby@PCMTec Posted October 8, 2021 Share Posted October 8, 2021 30 minutes ago, Bill said: I'm liking the look of the above too. I wonder how it would look docked to the right 😂 @Kirby@pcmtec Rolls and I actually just threw around a few ideas on how this might be configurable. No promises but I will investigate. 1 Quote Link to comment Share on other sites More sharing options...
JETURBO Posted October 8, 2021 Share Posted October 8, 2021 (edited) 1 hour ago, Roland@pcmtec said: I think we actually started out like this and decided the split was cleaner. But its probably reasonably easy to enable something to let you select Kirby made this in paint, is that what you mean? Or the axis as well? or just the axis? That’s the Ticket but stack them on top of each other like HPT Scanner if possible Axis’s as well all hard left ! Edited October 8, 2021 by JETURBO Quote Link to comment Share on other sites More sharing options...
hjtrbo Posted October 10, 2021 Share Posted October 10, 2021 Is there support for user renaming of channels and choice of common units? E.g wnd_gwk -> TCC Slip p_wk -> TCC kPa SKL_HDK_SK -> ZF TPS etc etc. And perhaps custom math channels and filters? Thanks. Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 11, 2021 Share Posted October 11, 2021 Renaming is supported in the beta. Press f2 or right click with show display name and you can rename the short name (what you've highlighted) Renaming the description will be available next beta update. If you have worked out what the horrid German acronyms are and found them useful submit a ticket with the IDs and names and we can get them permanently added. The ZF scalars definitely need some love. Units can be changed in bulk under the menu system. Math parameters are in the schedule, we have a math subsystem we use for the units currently which will be expanded for user input. The most time consuming part for that is building the parser that takes the 50 different ways people might type things and convert it to RPL in a manner that is performant and user friendly. I've seen some good and some terrible math user input so I want to make sure it's done right when we get to it. 2 Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted October 26, 2021 Share Posted October 26, 2021 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.